Home > News > Tool For Mobile Stee...

Tool for mobile steel pipe fittings

Update Time:11/23/2011

　　Steel is usually used for gas lines or water pipes connected to the copper water pipes, electric water heater family. steel pipe fittings at both ends of the pipeline by the end of threaded screw joints. Adding one to another pipe, fittings, accessories, also known as. Coupling line pipe with a hacksaw cut the ends to remove the non-threaded fittings.
　　About one-1 coupling fittings in pipe end wrench. Wrench counterclockwise rotation. If the pipe turns, brush threaded into the threaded fitting and around the spray lubricant.
　　2 coupling the handle 90 degrees, the first pipe clamp around the pipe of the second wrench handle. Hold the wrench around the steel pipe fittings pipe, and pull the wrench handle counter-clockwise around the fixture. If the fixture still will not budge, through a pipe 3 inches clamp a straight cut with a hacksaw.
　　3 coupled to each side of the 3-inch pipe, so that each trademark straight cut through the pipe. Remove the coupling. Will be cut on both sides of the steel pipe fittings wrench, turn the wrench and remove pipe. Pipe end can be re-thread and re-use.

Please send your message to us
(All fields are required.)
Your E-mail
To
Title
Content

Agree to use terms of service
Send